Bloop tube Question

Moderators: pilkguns, Marcus, m1963, David Levene, Spencer

Post Reply
Tanktrek
Posts: 143
Joined: Mon May 11, 2009 11:28 am
Location: State of New Jersey, USA

Bloop tube Question

Post by Tanktrek »

I recently purchase a bloop tube from Bill Earnest (ESP). When I initially mounted the tube I had excellent results. But recently I have been having trouble centering the tube and it is difficult to get my windage settings correct.

The tube has a notch in the back that I try to align each time I mount it.

Any help would be appreciated.
bugman1955
Posts: 106
Joined: Wed Jan 25, 2012 6:10 pm

bloop tube

Post by bugman1955 »

I also have a Earnest bloop tube. What you need to do is put a guide pin in the a hole at the end of the barrel. Mine is a screw that has the head removed. This will ensure proper alignment. Very happy with mine.
Tanktrek
Posts: 143
Joined: Mon May 11, 2009 11:28 am
Location: State of New Jersey, USA

Bloop Tube Question

Post by Tanktrek »

Thanks bugman

I was considering that very thing.
swift220swift
Posts: 39
Joined: Wed Nov 27, 2013 8:12 pm
Location: Hampstead, MD

Bloop Tube Question

Post by swift220swift »

Bill Earnest should have supplied one with the tube.
Post Reply