TargetTalk

relay1 · Joined: 19 Jan 2010 Posts: 10 Location: Louisville, KY

Can anyone give me the specifications for the two options for the shooting stand springs for SH2 shooters.

I have the spec's from the stand but not the spring and the ISCD rules state the spring has to be stamped by them to be official but if I had the specification of the springs I should be able to get something close enough for practice.

Thomas Monto · Joined: 02 Mar 2004 Posts: 109 Location: Midland, MI

VHC
ISCD & DSB rifle support
Price list 2005
The two types of ISCD supports are all marked with an ISCD stamp on the spring
and Aluminum parts. The color of the plastic top gives the code for the bending test.
White top means 35 mm bending during test with the test bars according the ISCD
/DSB rules. The black top means 25 mm bending during test with the test bars.
Type
Specifications
Price in €
Remarks
SH2 A support
35 mm bending by test bars
55,- *
According ISCD rules
(White plastic top )
SH2 B support /
DSB support
25 mm bending by test bars
55,- *
According ISCD rules and DBS rules
(Black plastic top)
Adapter for SH2 B / DSB support
( Black plastic top )
Re-adjuster for 25 mm bending specification
15,- *
According to ISCD rules ( replaces white plastic part )
Table support holder
Adjustable high 100mm
65,- *
Aluminium
Floor support holder
Adjustable high 70 – 140 cm
100,- *
Blue color ( Steel )
• All prices are including packing and ordering cost and shipping within Europe.
VHC , F. van Hoeven, Bolgerijsekade 2a, 4121 ER, Everdingen, The Netherlands
Tel + 31 345 641848
Fax + 31 345 642710
E- mail fvhoeven@wxs.nl

Garletti · Joined: 30 Nov 2007 Posts: 9

look in gehmann www.gehmann.com
they ship all over the world