Plans for constructing shooting case

If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true

Moderators: pilkguns, m1963, David Levene, Spencer, Richard H

Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
CraigE
Posts: 170
Joined: Mon Mar 01, 2004 9:57 am
Location: Bethlehem PA
Contact:

Plans for constructing shooting case

Post by CraigE »

I may not be the most adept at using search, but I do recall that somewhere in the past there was a posting of plans to build a target box for carrying pistols. Please help locate it. TIA, CraigE
Bill177
Moderator
Posts: 271
Joined: Tue Mar 02, 2004 9:32 am
Location: Upstate NY

Sent to you by email

Post by Bill177 »

CraigE,
I sent you a scanned picture that may be of some help.
TomF
Posts: 156
Joined: Mon Mar 01, 2004 9:41 am

Post by TomF »

can I have one to Bill177?

Thanks!

shootingsports@ev1.net
scout18
Posts: 74
Joined: Wed Mar 31, 2004 10:44 pm
Location: Portland Oregon

Post by scout18 »

May I have one too Bill?
Bill177
Moderator
Posts: 271
Joined: Tue Mar 02, 2004 9:32 am
Location: Upstate NY

Picture of the air pistol box

Post by Bill177 »

You can find the picture at:
http://www.airguninfo.com/box.htm

Unfortunately it is not a very good picture - so, if someone can send me a better picture or perhaps several pictures I'll post them on AirgunInfo for all to use.

The sender/photographer will receive the credit for the pictures.
CraigE
Posts: 170
Joined: Mon Mar 01, 2004 9:57 am
Location: Bethlehem PA
Contact:

Thanks Bill

Post by CraigE »

Much appreciate your efforts. Happy New Year and many 10's!
kleefurd
Posts: 24
Joined: Sat Jan 01, 2005 8:43 pm
Location: Hong Kong
Contact:

Post by kleefurd »

Happy New Year everyone.

I am new to target shooting and I am intending to build my own target box as well, one that can serve me well for the first five years of training. Don't think I will be owning more than 1 pistol at a time for this period, so this will be specific for 1 air pistol (most likely candidate a Styer LP10).

What are the things I should look out for, and thanks to Bill for sharing the photo, does anyone have a technical drawing/sketch that you can share? Or else I will make up one and put it up here and hopefully the more experienced shooters can give me your comments on improving on the design. It will be made of 1/2" ply, laminated finish, on castors for easy "roll about", lockable for legal reasons.

Please help. Thanks.
Bill Poole
Posts: 435
Joined: Mon Mar 01, 2004 10:50 pm
Location: Scottsdale, AZ
Contact:

Post by Bill Poole »

Kleeford

The LP10 comes in a VERY nice lockable case. add a duffle bag or back pack for your shooting glasses, ear plugs, pellets, targets (you won't need these at SCAA but you will at HKRA), in fact, Pilk sells a nice rolling back pack the case will fit into! http://www.pilkguns.com/ppack.htm

does your arms license allow you to keep the air pistol at home? if not, you probably don't want anything larger than the case it comes with to fit the door in the armory.

However if you will travel (come here!) you should not carry a gun in a home-made case as luggage. they make VERY good cases for air travel and the locked LP10 case wrapped in a suitcase of clothes is probably safe and legal.

US NRA bullseye pistol shooters use a very fancy box to hold 4 pistols and a scope and a bunch of .45 ammo, but international shooters do not and air gun shooters don't use a scope. international style shooters usually have a commercial airline-trying int'l and who is primarily int'l

I don't even think there is enuf room on an international bench for such a box as NRA shooters use.

Later, 再见

Poole

Image

LP10

Image

US pistols shooters
Bill Poole
Posts: 435
Joined: Mon Mar 01, 2004 10:50 pm
Location: Scottsdale, AZ
Contact:

Post by Bill Poole »

somehow some text got eaten as I was editing my post:

international style shooters usually have a commercial airline-trying int'l and who is primarily int'l

should read

international style shooters usually have a commercial airline-approved carry case. Look at the pic below, you can see who is an NRA shooter trying int'l and who is primarily int'l

sorry

Poole
kleefurd
Posts: 24
Joined: Sat Jan 01, 2005 8:43 pm
Location: Hong Kong
Contact:

Post by kleefurd »

Bill! You are everywhere!

Thanks for the pictures and explanation. I believe I am able to keep the pistol at home (if I am frequently competing) , but I have yet to confirm the conditions (trigger lock only or I have to invest in a safe) with the police department here.

I am a pretty lazy person, and dragging a trolley is definitely much easier and less effort than lugging a heavy bag, and that is why I was toying with the idea of a target box. Well, since you mention it, and the LP10 does have a pretty sweet case, I will most likely use a "generic" hand luggage case and add partitioning in when I go to the range with my personal items.

Thank you once again for all the information, Bill. You are a gem!

(second guy from left is an int'l yes? looks like a regular traveling shooter's case to me)
VAshooter

Shooting box

Post by VAshooter »

I built the pistol stand and box shown in the picture. I sold the pistol a year or two ago and was suprised to see it pictured here.
When I bought the FWB Model 100 I was irritated that when you layed the pistol on it's side it would rest on the rear sight. After a while I decided to make a stand to hold the pistol upright which is shown in the picture. Then, when I wanted to transport the pistol and stand to matches, I made the box to hold the stand with the pistol in it. I never made any plans as I just built it one part at a time to make everything fit.

Kinda like seing an old friend.

Doug in Virginia
VAshooter

Shooting box

Post by VAshooter »

I built the pistol stand and box shown in the picture. I sold the pistol a year or two ago and was suprised to see it pictured here.
When I bought the FWB Model 100 I was irritated that when you layed the pistol on it's side it would rest on the rear sight. After a while I decided to make a stand to hold the pistol upright which is shown in the picture. Then, when I wanted to transport the pistol and stand to matches, I made the box to hold the stand with the pistol in it. I never made any plans as I just built it one part at a time to make everything fit.

Kinda like seeing an old friend.

Doug in Virginia
kleefurd
Posts: 24
Joined: Sat Jan 01, 2005 8:43 pm
Location: Hong Kong
Contact:

Post by kleefurd »

Hi Doug!

*laughs*

Only in the shooting community you can actually MEET the person whose picture is circulated on the internet! Talk about a small community!
Andy Myers
Posts: 2
Joined: Tue Mar 23, 2004 10:48 am
Location: Shrewsbury, Shropshire U.K

Pistol Box Plans

Post by Andy Myers »

Craig,

check this site out, may be hat you want.

http://www.geocities.com/baneddo/gunbox.pdf
CraigE
Posts: 170
Joined: Mon Mar 01, 2004 9:57 am
Location: Bethlehem PA
Contact:

Thanks Andy

Post by CraigE »

Thanks for the link.....was exactly what I was looking for.
Craig
kleefurd
Posts: 24
Joined: Sat Jan 01, 2005 8:43 pm
Location: Hong Kong
Contact:

Post by kleefurd »

Thanks for the link! Its great!
scout18
Posts: 74
Joined: Wed Mar 31, 2004 10:44 pm
Location: Portland Oregon

Post by scout18 »

Great box. Where did you find it? Is there a credit that is due?
brian

shooting box plans

Post by brian »

Andy Myers,

The link shows a corrupted file. Who can I contact to get the file.

Thanks.
David Levene
Posts: 5618
Joined: Mon Mar 01, 2004 12:49 pm
Location: Ruislip, UK

Re: shooting box plans

Post by David Levene »

brian wrote:The link shows a corrupted file. Who can I contact to get the file.
I just opened it with no problem.
Guest

Re: Pistol Box Plans

Post by Guest »

Andy Myers wrote: check this site out, may be hat you want.
http://www.geocities.com/baneddo/gunbox.pdf
Fwiw....
If you shoot FP and don't require a deep multiple-gun case, make it about half the width. To maintain stability with the lid up and supporting a spotting scope, incorporate a slide-out drawer/table in the base which will extend the footprint area.
Post Reply