Margolin's.22 pistol trigger weight

If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true

Moderators: pilkguns, m1963, David Levene, Spencer, Richard H

Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
Post Reply
gfrad
Posts: 68
Joined: Thu Feb 26, 2009 3:12 am

Margolin's.22 pistol trigger weight

Post by gfrad »

my Margolin's.22 pistol trigger weight is 2 kilos how can I reduce to 1 kilo
User avatar
j-team
Posts: 1381
Joined: Mon Mar 28, 2005 2:48 am
Location: New Zealand

Re: Margolin's.22 pistol trigger weight

Post by j-team »

You can bend the trigger return spring to reduce some weight. Also some sear/hammer polishing will help (but don't do this unless you know what you are doing).
BobGee
Posts: 588
Joined: Fri Oct 01, 2010 6:43 am
Location: Sydney, Australia

Re: Margolin's.22 pistol trigger weight

Post by BobGee »

If you are handy at metal working and you don't need to keep your Margolin in pristine, collectors' condition, you can carry out the mod shown below, taken from AP Danilov's (gunsmith to USSR shooting teams) 1968 book (you remove the existing trigger spring); if you get the right type and size of spring steel (cut-up hacksaw blade?) you can make the weight adjustable around 1000gm:

Image

Alternatively, if your trigger pull is too long, you can shorten it as shown below (ibid) by hammering the trigger bar with the pein of a hammer between the upright part (the disconnector) and the notched LH end, or you can make a new trigger bar. This will then just employ the softer initial movement of the trigger though it won't get you down to 1000gm:

Image

I have done neither of these myself though one day I probably will, along with a few other Danilov mods. (http://toz35.blogspot.com.au/search?q=danilov)

Bob
Post Reply