M80 disassembly instructions Feinwerkbau

A place to discuss non-discipline specific items, such as mental training, ammo needs, and issues regarding ISSF, USAS, and NRA

If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true

Moderators: pilkguns, m1963, David Levene, Spencer, Richard H

Post Reply
buffalodiesel
Posts: 1
Joined: Sun Dec 21, 2014 8:23 pm

M80 disassembly instructions Feinwerkbau

Post by buffalodiesel »

Gentlemen.. since I hate to send out my M80 and seal kits are available...
is there anywhere on the web where I can find instructions on how to
probably disassemble a M80 pistole? In the USA there are no trusted dealers.
Rover
Posts: 6986
Joined: Sat Nov 15, 2008 4:20 pm
Location: Idaho panhandle

Re: M80 disassembly instructions Feinwerkbau

Post by Rover »

Try our host for such things, including repairs.
kevinweiho
Posts: 945
Joined: Wed Oct 14, 2009 12:44 pm
Location: Costa Rica, Central America

Re: M80 disassembly instructions Feinwerkbau

Post by kevinweiho »

I did a complete seal change and lube with my pistol using only the exploded parts drawing, which can be downloaded directly from FWB. Remember to take pictures just in case you forget how the part was assembled. http://www.feinwerkbau.de/en/Service+Do ... d-drawings

If you are mechanically inclined, I would recommend that you take a look at Mark Cone's diassembly of his FWB 65. http://s699.photobucket.com/user/cones_ ... t=9&page=4

The internals are very similar, except for the recoil/recoilless mechanism. Good luck, and tell us how you went with the diassembly/assembly of your pistol.
Post Reply