IZH 46M Rear Sight

Moderators: pilkguns, Marcus, m1963, David Levene, Spencer

Post Reply
BEMcCulloch
Posts: 5
Joined: Fri Feb 12, 2016 3:18 pm

IZH 46M Rear Sight

Post by BEMcCulloch »

I have an IZH 46M and the rear sight's elevation knob does not "click" like the windage knob does. The elevation knob simply spins. Does anyone know for sure whether this is correct or, as I suspect, is something in my rear sight broken?

If it is broken, any suggestions of how to fix it or where to start troubleshooting? Thanks!
JoeJackson
Posts: 47
Joined: Fri Oct 17, 2014 5:35 pm

Re: IZH 46M Rear Sight

Post by JoeJackson »

Check out this schematic at : http://eaacorp.com/parts-diagrams-with-prices

Look for part 39: http://eaacorp.com/gun_accessories/inde ... 00340.html

Threads may have stripped.
kevinweiho
Posts: 945
Joined: Wed Oct 14, 2009 12:44 pm
Location: Costa Rica, Central America

Re: IZH 46M Rear Sight

Post by kevinweiho »

BEMcCulloch wrote:I have an IZH 46M and the rear sight's elevation knob does not "click" like the windage knob does. The elevation knob simply spins. Does anyone know for sure whether this is correct or, as I suspect, is something in my rear sight broken?
You can hear the "click" noise when the tiny ball bearing is pressed against the notches each time the knob is turned. It may be a weak spring not giving enough tension to the ball bearing, the ball bearing fell out, or it could be rust.

Both windage and elevation knobs on my Izzy make a "clicking" sound.
Post Reply