Second Knob on Anschutz Front Sight

Moderators: pilkguns, Marcus, m1963, David Levene, Spencer

Post Reply
mtncwru
Posts: 441
Joined: Sun Dec 12, 2010 1:50 pm
Location: San Diego, CA
Contact:

Second Knob on Anschutz Front Sight

Post by mtncwru »

Does anyone know what the purpose of the extra knob on the left side of my Anschutz front sight is for?

Image
salar600
Posts: 18
Joined: Sat Feb 05, 2011 8:55 am
Location: Canada

Re: Second Knob on Anschutz Front Sight

Post by salar600 »

simetrical sight picture
User avatar
Andre
Posts: 464
Joined: Sun Mar 30, 2014 12:09 pm

Re: Second Knob on Anschutz Front Sight

Post by Andre »

I agree with Solar, but it might also be beneficial to leveling if you don't use a level.
Tim S
Posts: 2022
Joined: Mon Jan 03, 2011 11:33 am
Location: Taunton, Somerset

Re: Second Knob on Anschutz Front Sight

Post by Tim S »

Surely the sprung wire that pokes into the tunnel does that already, and much better?

Would it allow the tunnel to be mounted backwards?
User avatar
ShootingSight
Posts: 318
Joined: Fri May 18, 2012 9:37 pm
Location: Cincinnati, OH
Contact:

Re: Second Knob on Anschutz Front Sight

Post by ShootingSight »

I think one clamps the sight base onto the barrel, the other clamps the sight tunnel to the sight base. In other words, if you loosen it, you can rotate the tunnel on the sight base slightly, in case you like to hold a canted rifle.
Art Neergaard
ShootingSight LLC
www.shootingsight.com
info@shootingsight.com
513-702-4879
mtncwru
Posts: 441
Joined: Sun Dec 12, 2010 1:50 pm
Location: San Diego, CA
Contact:

Re: Second Knob on Anschutz Front Sight

Post by mtncwru »

As far as I can tell, the screw in question does nothing mechanical. The screws to control cant are in the front (or the rear, as there's no reason you can't mount the sight backwards). The "symmetrical sight picture" suggestion from salar600 makes the most sense, I think.

For leveling I would use an iris/insert with bars, since the spring wires inside are more sensitive to bending. Though in my case (shooting prone free rifle) I would just use a level :-)
User avatar
Andre
Posts: 464
Joined: Sun Mar 30, 2014 12:09 pm

Re: Second Knob on Anschutz Front Sight

Post by Andre »

ShootingSight wrote:I think one clamps the sight base onto the barrel, the other clamps the sight tunnel to the sight base. In other words, if you loosen it, you can rotate the tunnel on the sight base slightly, in case you like to hold a canted rifle.
The Anschutz m18 front sight does have the ability to cant, but that's not the adjustment screw. The two locking cant screws are located on the muzzle end between the bottom of the tube and the female dovetail.
BR1942
Posts: 47
Joined: Sat Feb 11, 2012 9:09 am
Location: Madrid. Spain

Re: Second Knob on Anschutz Front Sight

Post by BR1942 »

Is to hold the mírage band if used on a center-fire rifle.
redschietti
Posts: 386
Joined: Sun Apr 03, 2011 4:31 pm

Re: Second Knob on Anschutz Front Sight

Post by redschietti »

I have one just like it. Its just a "pretty" that makes the sight picture symmetrical
JasonM
Posts: 79
Joined: Sat Jul 30, 2011 3:26 pm
Location: Snohomish, WA

Re: Second Knob on Anschutz Front Sight

Post by JasonM »

It's nice that someone else is asking this question and that there are some on here who also aren't aware of what that's form. I spent about an hour after I got my first sight like that trying to figure out what that was for, before I actually read about it and saw that it was only for symmetry in the sight picture. :)
mtncwru
Posts: 441
Joined: Sun Dec 12, 2010 1:50 pm
Location: San Diego, CA
Contact:

Re: Second Knob on Anschutz Front Sight

Post by mtncwru »

That makes perfect sense, since your eye would be drawn to the part that's different. Thanks everyone!
BR1942
Posts: 47
Joined: Sat Feb 11, 2012 9:09 am
Location: Madrid. Spain

Re: Second Knob on Anschutz Front Sight

Post by BR1942 »

Faithless people !!!

Image
Image
Post Reply