Greetings,
I recently received a FWB 300S that had the barreled action removed from the stock. I don't know and can't locate the correct torque value (in inch/pounds) for the bedding screws. Can someone help with the correct value or where to find it?
TIA
Jim
FWB 300S Bedding Torque?
Moderators: pilkguns, Marcus, m1963, David Levene, Spencer
-
peashooter
- Posts: 74
- Joined: Thu Jan 26, 2012 3:04 am
- Location: New Zealand
Re: FWB 300S Bedding Torque?
From my experience it really didn't make any difference how tight - just do them up firmly.
Re: FWB 300S Bedding Torque?
Well then, snug it is...peashooter wrote:From my experience it really didn't make any difference how tight - just do them up firmly.
Thanks
Jim