TargetTalk

Well, I live in Michigan, USA and there are many opportunities to compete in Bullseye Pistol Competition within a hour or so from my house. I know of many bullseye matches across the state so Bullseye Competition is holding on but struggling in this area. I do not know of one Rapid Fire facility in ...

Ok, Just got into air pistol and struggling with a 540 average but I am looking at the cost of pellets for a tin of 500 and they range from approximately $8.00 to $20.00 for the 500 pellet tin. Coming from the rimfire and centerfire competition world, pellet costs are minor and people are trying to ...

Anybody vouch for __J__?

Hey 10shot: Where are you located? I belong to four gun clubs, two of which have a dedicated indoor air and 22LR program and each has a supply if club air pistols for members to use. Morini's and Hammerli's. Check around your area and see if you can find a similar club. Also, most shooters will let ...

Try facebook marketplace or craigslist . I got couple 3000 psi tanks for $100.00 for both, 2019 manufacture. Aluminum (I know, might of been the deal of the century)

There are a number of issues that commonly make the model 41 jam or malfunction. Extractor, ejector, magazines, dirty chamber. I would recommend doing the "Plop" test. That is you take the barrel and drop a loaded round in it. It should drop all the way in. turn the barrel breach down and ...

I have shot one of the blue stocked rifles and was considering purchasing it at the time. Cannot remember what brand the sights were but they were not top of the line but were functional. Trigger was not too bad but a bit heavy compared to my other target rifles. Cannot say that there was anything r...

Good Morning. Ok, I live in the USA and hae a number of scuba shops conveniently located throughout the area and compete at a number of ranges. I assist with filling the scuba tanks at the ranges when necessary. Personally, I own two aluminum scuba tanks myself for home use. Annual testing and inspe...

HI 22shooter. Back in 2013 I purchased a Pardini SP New Bullseye edition and have used it continuously ever since purchasing it. I also shoot it a lot, attend up to 5 matches a week year round. I shoot CCI SV in my Pardini and based on my ammo purchases, I go through between 2 and 4 cases of ammo a ...

Good Morning:

Need to fit a grip and what is the best product to use for a grip putty or grip bondo?

Also is it better to use plastic cling wrap for forming or a latex glove?

Got a used steyr lp50 and not to much dremel work is needed but a bit of material needs to be added.

Regards,
Crankster

I have a harbor freight and have used it on some parts but have stopped using it on firearm parts. It dulls the blue, impacts aluminum parts, and it does remove paint from painted parts. I would not hesitate to disassemble a pistol and use it to clean some of the smaller parts but would not put a as...

I took the CMP empty chamber indicator and whittled it down so that the tail was the same diameter up to the 90 deg bend and use that as a dry fire plug. Once inserted, it stays there no matter how many times you cycle the bolt. I have made a dozen or so, gave a few away, and yet to wear one out. Pr...

Well, I went on facebook marketplace and found a divorcee who was selling her former husbands stuff really cheap.

Got a aluminum scuba tank that was certified in 2020 (the only certification on it) for $100.00. She said it was completely filled too!

I just purchased a Steyr LP50. Took my old scuba tanks to get air and the salesman said that my tanks are old steel with max rating of 2,400psi. Recommended that i get either a 3,000psi aluminum tank or a 4,500psi carbon fiber tank. When i was diving regularly i remember the scuba stores being hard ...

Hi Jerry: While I primarily compete in Bullseye Pistol competitions, I have found that most matches are small local matches not advertised nationally nor on a nationwide, region wide, or state wide data base. With that being said, the best way that I have found matches, especially when traveling to ...

Hi BrassMaster:

I am happy for you. Didja get a chance to ask about recommended torque specs?

Personally, I own a Pardini and I went through the manual and I did not see a torque specification for the grip screw or any other screw on the pistol. If there is a published torque specification in the Walther Manuel or on their website then Walther might have a argument that the grip screw was ov...

Hi Fletcher: I have run a bullseye team and currently shoot with four separate teams in the winter and three in the summer around the area. As such, I have had the pleasure to set up a number of newbie handguns for bullseye pistol shooting. The following is a list of red dots that I own and have exp...

following this topic to see if orion shooter can get this fixed. If the kroil does not work, I would suggest the following: Alcohol Gentle heat like 160 degrees in a oven Plastic bag it and place in freezer if the weights are still stuck, try shooting it, Lots of people have their red dot knocked lo...

Hi Brad: I am over here in the States and decided to follow this thread. I shoot Bullesye Pistol Competition or "Precision Pistol" and do not have any opportunities for Rapid Fire Competitions. On a interesting note, over here in the States, we have three (or more) models of the Pardini SP...