TargetTalk

I think coming into the country there wouldn't be any issues at all. Leaving the origin country (e.g., the UK) might be more of an issue. I've bought BSA sights from the UK, air cylinders from Germany, and air rifles/pistols from the Netherlands and never had any problems.

https://www.pistoleer.com/shooting-targets/handgun/

https://shop.actiontarget.com/content/n ... t-b-19.asp

Sc0- wrote: ↑Fri Jan 27, 2023 7:52 am Thought krale had a note that they weren't able to ship FWB products to the states? Unless they removed that restriction for 2023? Darn.

That was (and is) Steyr products.

In case anyone is interested....

https://www.hinterlandoutfitters.com/sp ... 11446.html

(although the URL says "500box", the box and the webpage copy both say Q = 1,000)

Thanks everyone.

There are probably junior programs that would love to have some of them. I know we would for both Jr Air and 22 (https://www.mountjoysportsmen.com/event ... -programs/)

I need to slug my .32 S&W long barrel. I was considering just ordering a box of .315" diameter muzzleloading lead balls from Natchez Shooters Supplies, but there must be a less wasteful way to get a small piece of soft lead to work with. Does anyone have any ideas?

Thanks,
Tom

Are there any floating around out there?

Thanks, Tom.

To: fc60 Took your lead and called Bear Creek 30 minutes ago, Yes, they do have some inventory of 98 gr HBWCs. These are cast, then swaged at 0.314". Since I can't locate my Speer HBWCs, I ordered a bunch. Price is reasonable IMO and shipping is flat rate PMail. I'll be comparing the Magnus (n...

If the law is put into effect, what happens when the original owner passes on? Since "transfers" are forbidden, the next of kin cannot inherit. Does the government get the guns? What about compensation? Dennis, aka Dulcmrman FWIW, in my country this is exactly what happens. Inheritors mus...

Thankfully I did not remove the regulator! I appreciate the warning, since if/when I get the leak resolved I expect that I might find other problems which will cause me to remove the regulator.

I got a chance to look at the discussion you linked to. Apparently there were some substantial changes to the design between the time that MG1 was made and the time mine was made! In mine, the valve body sits on top of the frame of the pistol, directly behind the barrel. The valve body is part #H142...

I'll look at that site when I get a chance later today. I must have a different parts diagram than you do. I don't see an o-ring 1027 in the Matchguns-provided exploded diagram. I replaced the o-ring H154 (between valve body and frame of pistol). I think it may be the nylon washer/gasket H149. It's ...

I hope someone here can help me with an air leak on a Matchguns MGH1. When the cylinder is screwed on there's a rapid leak from the breech area. I disassembled a bit, and it seems to be coming out of the valve opening in the valve body. According to the parts diagram there don't seem to be any seals...

Thanks for the responses. Now I just need to get the riser block off the bottom of the stock. Someone torqued the hex bolts down unmercifully, and then stripped one.

Thanks for the info. I just assumed it was due to Covid, and that now that everyone's tired of it that things would go back to normal

Does anyone know whether the 2022 USA Shooting National Matches will be happening this year? I've never been able to go before due to work commitments, and now that I've finally got a little more free time it looks like they were shut down for 2020 and 2021.

I've got an assortment of Torx screwdrivers. (Nothing from Anschutz itself.) Can you explain how to adjust, or how to access it? If it's stuck it might simply be a matter of freeing it up.

Nope; no change at all.

The exact same thing. Nothing unusual about that aspect (i.e., the usual half-second hiss when you unscrew it).